2 x 4-20 mA/HART sensor inputs, 3 x 4-20 mA current outputs, 6 x operating relay (1 of which can be used as a fail-safe relay).
ATEX/UKEX approved for installation in an Ex-free area but with intrinsically safe sensor supply. Appropriate sensor can be installed Zone 0, 1, 2 (Class I Division 1, 2)
The VEGAMET 862 controller feeds up to 2 x connected 4- 20 mA/HART sensors, processes the measured values and displays them.
A large display for data visualisation is integrated in the housing designed for rough field conditions.
With a VEGAMET 862, tank level readings in one or two tanks can be reliably monitored and displayed as level, volume and/or percentage full, when used on a single tank Ullage can also be displayed in litres, and 1amp relays can be switched based on tank levels, e.g. for overfill protection alarm activation or pump/valve activation.
Integrated Bluetooth technology means the controller can be programmed, commissioned and troubleshooted quickly and easily via the free VEGATOOLS smartphone/tablet app or using a Bluetooth enabled PC with free VEGA software.
Protection rating
IP66/IP67, Type 4X
Inputs:
2x 4 … 20 mA/HART sensor input
4x digital input
Outputs:
3 x 0/4 … 20 mA current output
1x failure relay (instead of operating relay)
6x operating relay
Ambient temperature
-40 ... 60 °C
Measured value memory
Internally
SD card
Approvals
ATEX / Europe
c-UL-us
UKEX
Explosion protection: Intrinsic safety "i"
Display & adjustment
Adjustment
On-site adjustment
Smartphone / Tablet / PC via Bluetooth
Indication
LCD matrix display, black and white
Backlight with colour change acc. to status