12 input AC input module for dispenser hook-up inputs. The EVO™ 550 and EVO™ 5000 Automatic Tank Gauges come standard with a power supply module and a controller module. Additional interface modules can be installed. Interface modules ordered with an ATG will be installed at the factory. The following guidelines must be followed:
EVO™ 550: Six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module.
EVO™ 5000: Eleven total modules can be installed with a maximum of nine intrinsically safe modules and a maximum of three of any one kind of module.
TS-ACI 12 input AC input module, dispenser hook inputs
The ACI is a non-intrinsically safe module that has 12 identical optically
isolated AC input channels that can be used for dispenser hook isolation,
vapor processor input, or as generic AC inputs. The TS-550/5000evo
consoles can handle a total of 36 AC inputs or up to three AC Input Modules
in one system. Dispenser Hook Signals
Various TS-550/5000evo applications may require that the dispenser hook signals be wired into the console’s AC Input
Module. When making the connection for the hook signals to the AC Input Module, refer to the following diagram and use
these guidelines:
• If there are two hooks per dispenser: wire the two hooks from Dispenser 1 to AC input channels 1 & 2, the hooks from
Dispenser 2 to AC channels 3 & 4, etc..
• If there are three hooks per dispenser, then wire the three hooks of Dispenser 1 to the AC input channels 1, 2, 3 and so forth.
AC Input Module Specifications
Number of Channels: 12 optically isolated
Input Voltage Rating: 110 – 240 VAC
Input Current: 7 mA RMS